Free standard shipping on orders over $149.97
Brand guide

Stiebel Eltron tankless water heaters guide

A Stiebel Eltron tankless water heater is one of the most respected choices in electric water heating. Here’s how the Tempra and DHC lines compare.

Updated November 5, 2026 · 3 min read · By Tankless Water Heater Shop Editorial Team · How we write guides

Key takeaways

  • Tempra models are whole-house electric units from about 12 to 36 kW; Tempra Plus adds Advanced Flow Control to hold temperature when demand is high.
  • Trend versions are lower-cost variants; DHC and Mini models are point-of-use units.
  • Whole-house Tempra models need large electrical service; a Tempra 36 draws about 150 amps.

About Stiebel Eltron

Stiebel Eltron is a German manufacturer of electric water heaters and heat pumps, with U.S. headquarters in Massachusetts. It is especially known for electric tankless water heaters with precise electronic temperature control.

A Stiebel tankless water heater (or Stiebel electric tankless water heater) is often recommended by electricians for its build quality.

Tempra models

Model Approx. power Approx. amps at 240V Typical use
Tempra 12 / 15 12–14.4 kW 50–60 A One shower in warm climates, apartments
Tempra 20 about 19 kW about 80 A Small homes, warm climates
Tempra 24 24 kW 100 A 1–2 bathrooms, warm to mild climates
Tempra 29 about 29 kW about 120 A 2 bathrooms, warm to mild climates
Tempra 36 36 kW 150 A Whole house, larger demand

Each comes in Plus (with Advanced Flow Control) and, for some sizes, Trend versions. Part numbers such as 239221 (Tempra 20 Plus), 239222 (Tempra 24 Plus), 239225 (Tempra 36 Plus) and 239216 (Tempra 24 Trend) identify exact models.

The Stiebel Eltron Tempra Plus tankless water heater range tops out with the Stiebel Eltron Tempra 36 Plus tankless water heater, a common Stiebel Eltron Tempra 36 electric whole house tankless water heater choice in the South.

Advanced Flow Control

When you ask for more hot water than the unit can heat, a standard electric tankless heater lets the temperature drop. Tempra Plus units instead reduce the flow slightly to keep the water at your set temperature. That makes the Tempra Plus a good choice in colder months or where flow demand varies.

DHC and Mini point-of-use models

The DHC series and Mini units are compact point-of-use heaters for sinks and some showers, in 120V and 240V versions. The DHC-E models add electronic temperature control. See point-of-use water heaters.

Installation

Tempra units need dedicated 240V circuits, large breakers and heavy copper wire. Confirm panel capacity with an electrician. Install isolation valves for maintenance and follow the manual for clearances. See installation requirements.

Compare

See also EcoSmart and Rheem RTEX models, or compare fuels in gas vs electric tankless.

Compare electric units

Tempra-class units and alternatives with full electrical specs.

Shop electric tankless

Frequently asked questions

What is the difference between Tempra Plus and Tempra Trend?

Tempra Plus models include Advanced Flow Control, which automatically reduces flow slightly when demand exceeds capacity so the water stays at the set temperature. Trend models are simpler, lower-cost versions. Compare the spec sheets for the exact differences.

Which Stiebel Eltron Tempra do I need?

In warm southern climates, a Tempra 24 or 29 often covers 1–2 bathrooms; a Tempra 36 suits larger demand. In cold climates, even a Tempra 36 may be limited to one or two fixtures in winter. Use our sizing calculator.

How many amps does a Tempra 36 Plus need?

At 36 kW and 240V, about 150 amps, usually split across several double-pole breakers. Many homes need 200-amp or larger service. The manual lists exact requirements.

What do the numbers like 239221 mean?

They are Stiebel Eltron part numbers for specific models, such as the Tempra 20 Plus (239221), Tempra 24 Plus (239222) and Tempra 36 Plus (239225). They help you confirm you are buying the exact model.

This guide is general information for U.S. homeowners, not professional advice. Gas, electrical and venting work must follow the manufacturer’s instructions and local codes, and in most areas requires a licensed plumber, electrician or gas fitter and a permit. Specifications and prices change; always confirm details on the product page and in the installation manual.